Dc plug adapter: Convert a standard supply to 6 different plugs
Accessories | Power Supplies Australia
Skip to main content
Buy now
Compare
1-10V Dimmer
$17.61
Buy now
Compare
Power Cord 3 Pin AUS Plug to C13 IEC Plug 0.5 metres
$5.18
Buy now
Compare
Power Cord AU Mains Plug to IEC Plug 1.8 metres
$6.51
Buy now
Compare
Power Cord AU Mains Plug to Right Angle C13 IEC Plug 1.8 metres
$6.94
Buy now
Compare
Power Cord Right Angle AU Mains Plug to C13 IEC Plug with 0.75mm2 Cable 1.8 metres
$8.43
Buy now
Compare
Power Cord AU Mains Plug to IP68 3 way M16 Inline Connector 1.8mtrs – 3.5mm-7mm OD
$26.18
Buy now
Compare
Power Cord AU Mains Plug to IP68 3 way M20 Inline Connector 1.8mtrs – 5mm-9mm OD
$26.83
Buy now
Compare
Power Cord 3 Pin AUS Plug to C5 IEC Cloverleaf Plug 1.8 metres
$6.94
Buy now
Compare
Power Cord 2 Pin AUS Plug to Fig 8 C7 plug 0. 75mm2 Wire 1.5 metres
$6.18
Buy now
Compare
Power Cord AU 2 Pin Mains Plug to stripped & tinned 1.0mm2 Wires 1.0 metres
$3.91
Buy now
Compare
Power Cord 3 Pin USA Plug to C13 IEC Plug 1.5 metres
$7.29
Buy now
Compare
Power Cord 3 Pin UK Plug to C13 IEC Plug 1.5 metres
$9.70
Buy now
Compare
Power Cord 2 Pin EUR Plug to C13 IEC Plug 1.5 metres
$7.94
Buy now
Compare
DC Power Lead Adapter 2.1 / 5.5mm Plug – Fly Leads 20AWG 100mm
$2.42
Buy now
Compare
DC Power Lead Adapter 2.1 / 5.5mm Plug — Fly Leads 20AWG 400mm
$2.75
Buy now
Compare
DC Power Lead Splitter 2.1mm / 5.5mm Socket – 2 x 2.1/5.5mm Plugs 20AWG 300mm
$6.82
Buy now
Compare
DC Power Lead Splitter 2.1mm /5.5mm Socket – 4 x 2.1 / 5.5mm Plugs 20AWG 300mm
$10.56
Buy now
Compare
DC Power Lead Splitter 2.1 / 5.5mm Socket – 8 x 2. 1 / 5.5mm Plugs 20AWG 300mm
$17.80
Buy now
Compare
DC Power Lead Adapter 2.1 / 5.5mm Socket – Fly Leads 20AWG 100mm
$2.55
Buy now
Compare
DC Power Lead Adapter 2.1mm / 5.5mm Socket – Fly Leads 20AWG 400mm
$3.86
Buy now
Compare
DC Power Lead Adapter 2.1mm / 5.5mm Socket – Fly Leads 20AWG 2mtrs
$11.00
Buy now
Compare
DC Power Lead Adapter 2.1mm / 5.5mm Socket – 2.1mm / 5.5mm Plug 20AWG 1mtr
$5.49
Buy now
Compare
DC Power Lead Adapter 2.1mm / 5.5mm Socket – 2.1mm / 5.5mm Plug 20AWG 2mtrs
$11.00
Buy now
Compare
DC Power Lead Adapter 2.1/5.5mm Socket to 2.5/5.5mm Plug Tuning Fork type 20AWG 250mm
$5.61
Buy now
Compare
DC Power Lead Splitter 2.5 / 5.5mm Socket to 2 x 2.1/5.5mm Plugs 20AWG 300mm
$10.22
Buy now
Compare
DC Adapter 2.1mm Socket / 5.5mm Plug -Screw Terminals
$2.42
Buy now
Compare
DC Adapter 2. 1/5.5mm Socket to Screw Terminals
$2.42
Buy now
Compare
DC Adapter 2.5 / 5.5mm Plug to Screw Terminals
$2.42
Buy now
Compare
DC Adapter 2.5 / 5.5mm Socket to Screw Terminals
$2.42
Buy now
Compare
DC Plug Adapter 2.1mm Socket (P1J) to Right Angle 2.1mm Plug (P1IR-9.5mm) – Max 6A rating
$1.45
Buy now
Compare
DC Plug Adapter 2.1mm Socket (P1J) to 2.1mm Right Angle Plug (P1J-11mm) – Max 6A rating
$1.45
Buy now
Compare
DC Plug Adapter 2.1mm Socket (P1J) to 2.5mm Plug (P1L-9.5mm) – Max 6A rating
$1.45
Buy now
Compare
DC Plug Adapter 2.1mm Socket (P1J) to 2.5mm Right Angle Plug (P1L-9.5mm) – Max 6A rating
$1.45
Buy now
Compare
DC Plug Adapter 2.1mm Socket (P1J) to 2.5mm Plug (P1M-11mm) – Max 6A rating
$1.45
Buy now
Compare
DC Plug Adapter 2.1mm Socket (P1J) to 2.5mm Right Angle Plug (P1MR-11mm) – Max 6A rating
$1. 45
Buy now
Compare
DC Plug Adapter 2.1mm Socket (P1J) to 0.7mm Plug (P3A-11mm) – Max 2A rating
$2.89
Buy now
Compare
DC Plug Adapter 2.1mm Socket (P1J) to 1.7mm/4.0mm Plug (P3B-11mm) – Max 2A rating
$1.45
Buy now
Compare
DC Plug Adapter 2.5mm Socket (P1M) to 2.1mm Plug (P1J-11mm) – Max 6A rating
$1.45
Buy now
Compare
DC Plug Adapter 2.5mm Socket (P1M) to 2.1mm Right Angle Plug (P1J-11mm) – Max 6A rating
$1.45
Buy now
Compare
DC Plug Adapter 4P DIN Socket (R7B) — 2.1mm Plug (P1J-11mm) – Max 6A rating
$4.16
Buy now
Compare
DC Plug Adapter 4P DIN Socket (R7B) to 2.5mm Plug (P1M-11mm) – Max 6A rating
$4.16
Buy now
Compare
Polarity Cross Over for MEAN WELL GE Series Power Adapter
$7.48
Buy now
Compare
Set of International AC Plug Tops for MEAN WELL GE Series Power Adapter
$12.88
Buy now
Compare
US AC Plug for MEAN WELL GE Series Power Adapter
$3. 20
Buy now
Compare
US AC Plug for MEAN WELL GE Series Power Adapter
$2.42
Buy now
Compare
UK AC Plug for MEAN WELL GE Series Power Adapter
$4.16
Buy now
Compare
EU AC Plug for MEAN WELL GE Series Power Adapter
$3.20
Buy now
Compare
DC Power Lead Adapter 2.5 / 5.5mm Socket to 2.5 / 5.5mm Plug 20AWG Figure 8 1500mm
$8.10
Buy now
Compare
DC Power Lead Adapter 2.5 / 5.5mm Socket to 2.5 / 5.5mm Plug 20AWG 1.5m
$8.10
Buy now
Compare
DC Power Lead Adapter 2.1 to 5.5mm Plug – Fly Leads 20AWG 130mm
$1.90
You are here
Home » Products » Power Adapters » Accessories
FREE SHIPPING
*Spend more than $50
(Australia wide)
Shop Online Now
Back to Top
Complete Guide to Using the Correct Charger or Power Adapter (and What Happens If You Don’t)
Wait! Just because the plug for that universal adapter fits into your laptop or phone doesn’t mean it’s safe to use. Read this guide on finding the right charger or power adapter.
The other weekend, I sat down and sorted through all my random electronics junk. As part of that process, I took all my power supplies and adapters and threw them into a box. It ended up being a pretty big box. I’m willing to bet that any given household has a dozen or more different types of cell phone chargers, AC/DC adapters, power bricks, power cables, and charger plugs.
Having so many chargers can be pretty frustrating. It’s easy to get them separated from the phone or laptop or tablet, or router. And once that happens, it can be complicated to figure out which goes with which. The default solution is to try random plugs until you find one that fits into your device. However, this is a big gamble. If you grab an incompatible power adapter, your best case scenario is that it works, albeit not the way the manufacturer intended. The second worst-case scenario is that you fry the gadget you are trying to power up. The worst-case scenario is that you burn down your house.
In this article, I’m going to walk you through the process of digging through your junk drawer and finding the right power adapter for your device. Then, I’ll tell you why it’s so important to do so.
In a nutshell:
- The following will cause damage to your device:
- Reverse polarity
- Higher voltage adapter than device rating
- The following will cause harm to your power cord or adapter:
- Reverse polarity
- Lower current adapter than device rating
- The following might not cause damage, but the device will not work properly:
- Lower voltage adapter than device rating
- Higher current adapter than device rating
A Very Brief Introduction to Electrical Terminology
Each AC/DC power adapter is specifically designed to accept a certain AC input (usually the standard output from a 120 V AC outlet in your home) and convert it to a particular DC output. Likewise, each electronic device is specifically designed to accept a certain DC input. The key is to match the DC output of the adapter to the DC input of your device. Determining the outputs and inputs of your adapters and devices is the hard part.
Power adapters are a bit like canned food. Some manufacturers put a lot of information on the label. Others put just a few details. And if there is no information on the label, proceed with extreme caution.
The most important details for you and your delicate electronics are the voltage and the current. Voltage is measured in volts (V), and current is measured in amps (A). (You’ve probably also heard about resistance (Ω), but this doesn’t usually show up on power adapters.)
To understand what these three terms mean, it helps to think of electricity as water flowing through a pipe. In this analogy, the voltage would be the water pressure. Current, as the term implies, refers to the flow rate. And resistance relates to the size of the pipe. Tweaking any of these three variables increases or decreases the amount of electrical power sent to your device. It’s important because too little power means your device won’t charge or operate correctly. Too much power generates excess heat, which is the bane of sensitive electronics.
The other important term to know is polarity. There is a positive pole (+) and a negative pole (-). For an adapter to work, the positive plug must mate with a negative receptacle or vice versa. By nature, direct current is a one-way street, and things won’t work if you try to go up the downspout.
If you multiply the voltage by the current, you get the wattage. But the number of watts alone won’t tell you if the adapter is right for your device.
Reading an AC/DC Adapter Label
If the manufacturer was smart enough (or compelled by law) to include the DC output on the label, you are in luck. Look at the “brick” part of the adapter for the word OUTPUT. Here, you’ll see the volts followed by the direct current symbol and the current.
The DC symbol looks like this:
To check the polarity, look for a + or – sign next to the voltage. Or, look for a diagram showing the polarity. It usually consists of three circles, with a plus or minus on either side and a solid circle or C in the middle. If the + sign is on the right, then the adapter has positive polarity:
If there is a – sign on the right, then it has negative polarity:
Next, you want to look at your device for the DC input. You’ll usually see at least the voltage near the DC plug receptacle. But you also want to make sure the current matches, too.
You might find both the voltage and the current elsewhere on the device, on the bottom or inside a battery compartment cover, or in the manual. Again, look for the polarity by either noting a + or – symbol or the polarity diagram.
Remember: the input of the device should be the same as the output of the adapter. This includes polarity. If the device has a DC input of +12V / 5.4A, get an adapter with a DC output of +12V / 5.4A. If you have a universal adapter, ensure it has the proper current rating and choose the correct voltage and polarity.
Fudging It: What Happens if You Use the Wrong Adapter?
Ideally, you’ll have the same voltage, current, and polarity on your adapter and device.
But what if you accidentally (or purposefully) use the wrong adapter? In some cases, the plug won’t fit. But there are many instances where an incompatible power adapter will plug into your device. Here’s what you can expect in each scenario:
- The wrong polarity – If you reverse the polarity, a few things can happen. If you’re lucky, nothing will happen, and no damage will occur. If you are unlucky, your device will be damaged. There’s a middle ground, too. Some laptops and other devices include polarity protection, which is essentially a fuse that burns out if you use the wrong polarity. If this happens, you might hear a pop and see smoke. But the device may still work on battery power. However, your DC input will be toast. To fix this, either replace the polarity protection fuse or get it serviced. The good news is that the main circuitry wasn’t fried.
- Voltage too low – If the voltage on an adapter is lower than the device, but the current is the same, then the device may work, albeit erratically. If we think back to our analogy of voltage being water pressure, it would mean that the device has “low blood pressure.” The effect of low voltage depends on the complexity of the device. A speaker, for example, might be okay, but it won’t get as loud. More sophisticated devices will falter and may even shut themselves off when they detect an under-voltage condition. Usually, an under-voltage condition won’t cause damage or shorten the life of your device.
- Voltage too high – If the adapter has a higher voltage, but the current is the same, then the device will likely shut itself off when it detects an overvoltage. If it doesn’t, it may run hotter than normal, which can shorten the device’s life or cause immediate damage.
- Current too high – If the adapter has the correct voltage, but the current is greater than what the device input requires, you shouldn’t see any problems. For example, if you have a laptop that calls for a 19V / 5A DC input, but you use a 19V / 8A DC adapter, your laptop will still get the 19V voltage it requires, but it will only draw 5A of current. As far as current goes, the device calls the shots, and the adapter will have to do less work.
- Current too Low – If the adapter has the correct voltage, but the adapter’s rated current is lower than what the device input, then a few things might happen. The device could power on and draw more current from the adapter than it’s designed for. This could cause the adapter to overheat or fail. Or, the device may power on, but the adapter may not be able to keep up, causing the voltage to drop (see voltage too low above). For laptops running on undercurrent adapters, you might see the battery charge, but the laptop is not powering on, or it may run on power, but the battery won’t charge. Bottom line: it’s a bad idea to use a lower current rating adapter since it could cause excess heat.
You would expect to see all of the above based on a simple understanding of polarity, voltage, and current. What these outlooks don’t take into account is the various protections and versatility of adapters and devices. Manufacturers may also build a bit of a cushion into their ratings. For example, your laptop may be rated for an 8A draw, but in reality, it only draws around 5A. Conversely, an adapter may be rated at 5A but can withstand currents up to 8A. Also, some adapters and devices will have voltage and current switching or detecting features that will adjust the output/draw depending on what’s needed. And as mentioned above, many devices will automatically shut down before it causes damage.
That being said, I don’t recommend fudging the margin under the assumption that you can do the equivalent of driving 5 MPH over the speed limit with your electronic devices. The margin is there for a reason, and the more complicated the device, the more potential for something to go wrong.
Have any cautionary tales about using the wrong AC/DC adapter? Warn us in the comments!
P.S. Wall adapters that give you a USB port for charging aren’t nearly as tricky. Standard USB devices have a 5 V dc voltage and a current up to .5 A or 500 mA for charging only. This is what allows them to play nice with the USB ports on your computer. Most USB wall adapters will be 5 V adapters and have a current rating well over .5 A. The iPhone USB wall adapter I’m holding in my hand right now is 5 V / 1 A. You also don’t have to worry about polarity with USB. A USB plug is a USB plug, and all you usually have to worry about is a form factor (e.g., micro, mini, or standard). Furthermore, USB devices are smart enough to shut things down if something isn’t right. Hence, the oft-encountered “Charging is not supported with this accessory” message.
Feature image by Qurren – GFDL (http://www. gnu.org/copyleft/fdl.html) or CC-BY-SA-3.0 (http://creativecommons.org/licenses/by-sa/3.0/), via Wikimedia Commons
Related Items:Featured, Hardware, lifehack, Mobile
Apple AC Wall Plug Adapter Exchange Program – Apple Support
Select a country or region EspañaΕλλάδαFranceHong Kong (English)香港HrvatskaIcelandIndiaIndonesiaIrelandIsraelItalia日本대한민국LatvijaLietuvaLuxembourg (Français)澳門MagyarországMalaysiaMéxicoMoldovaMontenegroNederlandNew Zealand NorgeNorth MacedoniaOmanÖsterreichParaguayPolskaPortugalRussiaRéunionRomâniaSaudi ArabiaSchweizSingaporeSlovenijaSlovenskoSouth AfricaSuisseSuomiSverige台灣ไทยTürkiyeUnited Arab EmiratesUnited KingdomUnited StatesUruguayVietnamOther countries
Country/Region
When this control is changed, the page will automatically refresh
Apple has determined that, in rare circumstances, 2-pin adapters designed for use in Continental Europe, Australia, New Zealand, Korea, Argentina, and Brazil can be damaged and create an electrical hazard if touched. These wall outlet adapters shipped between 2003 and 2015 with Macs and select iOS devices, and were also included with the Apple World Travel Adapter Kit.
Customer safety is Apple’s number one priority, so we have decided to exchange every defective power adapter for a new, upgraded adapter free of charge. We encourage you to use the procedure below to replace all defective components.
Note. Other power adapters for wall outlets, including UK, Hong Kong, Canada, China, US, Japan, and Apple USB Power Adapters, are not eligible for this program.
Wall outlet adapter model identification
Use the illustrations below to identify the adapter model. Defective power adapters for wall outlets may or may not have 4-5 character text on the internal slot where it attaches to the Apple Power Adapter. Instead, advanced adapters use a three-letter region code (EUR, KOR, AUS, ARG, or BRA).
Defective
Improved
Round thin contact feet, slightly curved inwards |
Round thick contact feet | Angled flat contact feet | Round thin contact feet |
Continental Europe | Korea | Australia New Zealand Argentina |
Brazil |
Not all countries/regions that support a given adapter are listed in the table. Adapters can also be used in other countries.
Have the adapter replaced by your nearest Apple Authorized Service Provider. To replace defective parts, you must provide the serial number of your Mac, iPad, iPhone, or iPod, which must be determined in advance. Finding the serial number of an Apple product is easy.
Customers who purchased the World Travel Adapter Kit must follow the defective component exchange option above.
Additional information
This program does not affect the statutory rights of customers or the terms of the warranty.
If this issue caused you to pay for a replacement or repair, contact Apple for a refund.
Learn more
about using Apple power adapters, cables, and plugs with Apple products.
Information is correct as of Feb. 5, 2016
24 volt adapter, 24V AC adapter from China supplier
4
Adapter power supply 24V 1A with replaceable plug
brand: JYH or OEM
0003
Minimum Order Quantity: 200 Piece/Pieces
Certifications : ISO14000
24V Detachable AC Adapter Plug Description: The advantage of choosing a replacement power adapter is that the plug can change in different countries, which can meet different market needs. It is light, ultra-thin, elegant,…
Contact Now
0003
Packing Details: PE bag with carton
Supply Ability: 300000pcs/month
Minimum Order Quantity: 200 Piece/Pieces
Certificates : ISO14000
Pulse power supply 24V, 1A description : 24V1A AC DC replaceable power adapter 36W He Suitable for a very wide range of applications, including: CCTV box, Instruments, Printer, LED, Set-top box, ADSL, Hard disk drive, Audio…
Contact Now
over current power adapter
brand: OEM
02 Minimum Order Quantity: 200 Piece/Pieces
Certificates : ISO14000
Replaceable Plug Power Adapter 24V 1000MA Adapter 24V 1000mA Replaceable Plug Power Adapter Description: This international 24V 1A 24W DC power supply comes with 4 replaceable AC contacts, allowing you to…
Contact Now
Plug 24v 1.5a Universal Power Supply
Brand: OEM
Packing Details: Poly bag with box
Supply Ability: 300000pcs/month
Minimum Order Quantity: 200 Piece/ Pieces
Certifications : ISO14000
Plug 24v 1. 5a Universal Power Supply 24V 1.5A Replaceable Plug Power Adapter Description: This power supply has 100-240V input and 24V DC output 1.5A. Capable of handling 36 peaks Tue Product total length (including…
Contact Now
Replacement plug 24v 0.5a power adapter
Brand: JYH or OEM
Packing Details: Poly bag with box 9 0003
Supply Ability: 300000pcs/month
Minimum Order Quantity: 500 Piece /Pieces
Certifications : ISO14000
Replacement Plug 24v 0.5a Power Adapter 24V DC 500mA Power Adapter Description: 24v 0.5a power supply with universal input. Although designed to be used with Radio Design Labs products, it can also be used wherever required…
Contact Now
Interchangeable plug adapter, switching adapter with separable AC plug, universal adapter, switching interchangeable power supply, interchangeable power supply, 2 detachable power plug adapter with 5 different plug types (CN, EU, US, AU and Great Britain).