Husqvarna lth130: TractorData.com Husqvarna LTH130 tractor information
Husqvarna LTh230 Lawn Tractor Price, Specs, Review 2023
by RANJITSINH MANTRI
Husqvarna LTh230 Price, Reviews, Specs, Engine Oil Capacity, Weight, Serial Numbers, Attachments, Features & Pictures
Husqvarna LTh230 Lawn Tractor is fitted with a Kohler CV15S gasoline 1-cylinder air-cooled 426 cc engine, which delivers 13 hp (9.7 kW) power.
Husqvarna LTh230 Lawn Tractor featured a 13HP Kohler 426cc 1-cyl gasoline engine, hydrostatic transmission, 4×2 2WD, infinite forward and reverse gears, and 2 gals 7.6 L fuel capacity.
Husqvarna LTh230 Lawn tractor attachments include a 42″ mid-mount mower deck.
Now, let’s find out the Husqvarna LTh230 Lawn Tractor Price, Parts Specs, Weight, Attachments, Reviews, Serial numbers & Images.
Husqvarna LTh230 Price
Husqvarna LTh230 Original Price: $1,650
Husqvarna LTh230 Serial Number
- Not Available
Husqvarna LTh230 Review Video
Customer Responsibilities
Assembly
- Assembly
- Operation
- Cutting Height
- Operation
- Oil Level
- Starting the Engine
- Starting
- Mowing Tips
Operation
- Lubrication Chart
- Maintenance Schedule
-
- Transaxle
- Levels
- Oil Change
- Engine
- Air Screen
- Cooling Fins
- Fuel Filter
- Spark Plug(S)
- Muffler
- Removal
- Side-To-Side
- To Level Mower Housing
- Brake Adjustment
- Installation
Maintenance Schedule
Service and Adjustments
- Tractor Battery
-
- Remove Hood/Grill Assembly
- Replace Headlight Bulb Interlocks/Relays
- Carburetor
- Throttle Control Cable
- Cleaning
- Storage
- Terminals
- Troubleshooting
Troubleshooting
- Schematic
- Repair Parts – Tractor
- Repair Parts
- Steering Assembly
Repair Parts – Tractor
- Replacement
Warranty
Advertisement
LTh230
This product has a low emission engine which operates differently
from previously built engines. Before you start the engine, read
and understand this Owner’s Manual.
Owner’s Manual
Table of Contents
Previous Page
Next Page
Table of Contents
Summary of Contents for Husqvarna LTh230
Husqvarna LT130 Owner’s Manual – ManualsBase.com
Summary of Page #1
LT130
Owner’s Manual
Summary of Page No. 2
SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. I. GENERAL OPERATION III. CHILDREN • Read, understand, and follow all instructions in the manual Tragic accidents can occur if the operator is not alert to the and on the machine before starting. presence of children. Children are often attracted to the
Summary of Page No. 3
CONGRATULATIONS on your purchase of a new tractor. PRODUCT SPECIFICATIONS It has been designed, engineered and manufactured to HORSEPOWER: 13.0 give you the best possible dependability and performance. GASOLINE CAPACITY 2 GALLONS Should you experience any problem you cannot easily AND TYPE: UNLEADED REGULAR remedy, please contact your nearest authorized service center/department. We have competent, well-trained tech- OIL TYPE (API-SF/SG): SAE 30 (above 32°F) nicians and the proper tools to ser
Summary of Page No. 4
TABLE OF CONTENTS SAFETY RULES ……………………………………….. ………….. 2 MAINTENANCE SCHEDULE ……………….. …. 14 PRODUCT SPECIFICATIONS………………………… 3 SERVICE AND ADJUSTMENTS . ……………………. 19-23 CUSTOMER RESPONSIBILITIES ……………….. .. 3, 14-17 STORAGE. ………………………………….. ……………………. 24 ASSEMBLY …………………. ………………………………….. 6-9TROUBLESHOO
Summary of Page No. 5
CONTENTS OF HARDWARE PACK Parts Bag contents shown full size (2) Nylon Locknuts
(2) Screws #10 x 5/8 3/8-16 (2) Weld
Nuts #10 (2) Washers
(2) Hex Bolts 3/8-16 x 1 17/32 x 7/8 x 16 Ga. (2) lock
Washers #10 Parts packed separately in carton (2) Washers
3/16 x 3/4 x 16 Gauge (1) Large
Flat Washer (3) Tinnerman
Seat Clip Steering
Wheel Nose Roller (1) Locknut
3/8-24 (1) Hex Bolt 5/16-18 x 1-1/4 Mulcher
(1) Locknut 5/16-18 Manual Plate Parts Bag (1) Shoul
Summary of Page No. 6
ASSEMBLY Your new tractor has been assembled at the factory with an exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY INSERT A socket wrench set will make assembly easier. Standard 3/8-24 LOCKNUT wrench sizes are listed. LARGE FLAT (2) 7/16″ wrenches Phillips Screwdriver WASHER
Summary of Page No. 7
ASSEMBLY CONNECT BATTERY (See Figs. 2 and 3) CAUTION: Do not short battery terminals. Before connecting battery, re- SEAT move metal bracelets, wristwatch PAN bands, rings, etc. Positive terminal must be connected first to prevent sparking from accidental grounding. BATTERY • Remove cardboard packing from seat pan and lift seat BOX DOOR pan to raised position. • Open battery box door. • Remove terminal protective caps and discard. • If this battery is put into service after month and year
Summary of page no. 8
ASSEMBLY INSTALL MULCHER PLATE TO ATTACH NOSE ROLLER (See Fig. 4) (See Figs. 7 and 8) • Position brackets, 17/32 x 7/8 x 16 gauge washers, and nose roller between deck mounting brackets as shown. • Install two latch hooks to mulcher plate using screw, Be sure to position brackets on correct side, as shown. washer, lock washer, and weld nut as shown. • Install 3/8-16 x 1 hex bolts and 3/8-16 crownlock nuts NOTE: Pre-assemble weld nut to latch hook by inserting as shown. Tighten hardware securely
Summary of Page No. 9
ASSEMBLY TO CONVERT TO BAGGING OR 3 CHECKLIST DISCHARGING BEFORE YOU OPERATE AND ENJOY YOUR NEW Simply remove mulcher plate and store in a safe place. TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE Your mower is now ready for discharging or installation of THE BEST PERFORMANCE AND SATISFACTION FROM optional grass catcher accessory. THIS QUALITY PRODUCT. NOTE: It is not necessary to change blades. The mulcher PLEASE REVIEW THE FOLLOWING CHECKLIST: blades are designed for discharging and bagging al
Summary of page no. 10
OPERATION KNOW YOUR TRACTOR READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. FIG. 9Our tractors conform to the sa
Summary of page no. 11
OPERATION WEAR YOUR The operation of any tractor can result in foreign objects thrown into the eyes, which SAFETY GLASSES can result in severe eye damage. Always wear safety glasses or eye shields while FORESIGHT IS BETTER operating your tractor or performing any adjustments or repairs. We recommend a wide THAN NO SIGHT vision safety mask for over the spectacles or standard safety glasses. TO MOVE FORWARD AND BACKWARD HOW TO USE YOUR TRACTOR (See Fig. 10) TO SET PARKING BRAKE (See Fig. 1
Summary of page no. 12
OPERATION • Move gearshift lever to 1st gear. Be sure you have TO OPERATE MOWER (See Fig. 11) allowed room for tractor to roll slightly as you restart Your tractor is equipped with an operator presence sensing movement. switch. Any attempt by the operator to leave the seat with • To restart movement, slowly release parking brake and the engine running and the attachment clutch engaged will clutch/brake pedal. shut off the engine. • Make all turns slowly. • Select desired height of cut. • Sta
Summary of page no. 13
OPERATION TO START ENGINE (See Fig. 9) • When operating attachments, select a ground speed that will suit the terrain and give best performance of When starting engine for the first time or if engine has run the attachment being used. out of fuel, it will take extra cranking time to move fuel from the tank to the engine. • Depress clutch/brake pedal and set parking brake. • Place gearshift lever in neutral (N) position. • Move attachment clutch to “DISENGAGED” position. • Move throttle control l
Summary of page no. 14
CUSTOMER RESPONSIBILITIES MAINTENANCE SCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE SERVICE DATES Check Brake Operation 4 4 Check Tire Pressure 4 4 T Check for Loose Fasteners 4 4 7 4 R Sharpen/Replace Mower Blades 4 4 A Lubrication Chart 4 4 C Check Battery Level /Recharge 6 4 T Clean Battery and Terminals 0 4 4 R Check Transaxle Cooling 4 Adjust Blade Belt(s) Tension 4 5 Adjust Motion Drive Belt(s) Tension 4 5 Check Engine Oil Level 4 4 Change Engine Oil 4 4 1 1, 2. 3 4 Clean Air Filter
Summary of page no. 15
CUSTOMER RESPONSIBILITIES TO SHARPEN BLADE (See Fig. 15) TRACTOR Care should be taken to keep the blade balanced. An Always observe safety rules when performing any mainte- unbalanced blade will cause excessive vibration and even- nance. tual damage to power and engine. • The blade can be sharpened with a file or on a grinding BRAKE OPERATION wheel. Do not attempt to sharpen while on the mower. If tractor requires more than six (6) feet stopping distance • To check blade balance, you will need
Summary of page no. 16
CUSTOMER RESPONSIBILITIES V-BELTS OIL FILL CAP/DIPSTICK Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. TRANSAXLE COOLING Keep transaxle free from build-up of dirt and chaff which can restrict cooling. ENGINE OIL DRAIN PLUG LUBRICATION Only use high quality detergent oil rated with API service FIG. 16 classification SF or SG. Select the oil’s SAE viscosity grade according
Summary of page no. 17
CUSTOMER RESPONSIBILITIES MUFFLER COVER KNOB Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or damage. CARTRIDGE NUT SPARK PLUGS COVER Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever PAPER occurs first. Spark plug type and gap setting are shown in CARTRIDGE “PRODUCT SPECIFICATIONS” on page 3 of this manual. FOAM PRE-CLEANER IN-LINE FUEL FILTER (See Fig. 19) The fuel filter sh
Summary of page no. 18
SERVICE AND ADJUSTMENTS CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: • Depress clutch/brake pedal fully and set parking brake. • Place gearshift lever in neutral (N) position. • Place attachment clutch in “DISENGAGED” position. • Turn ignition key “OFF” and remove key. • Make sure the blades and all moving parts have completely stopped. • Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. TRACTOR CLUTCH LEVER TO REMOVE MOWER (See Fig.
Summary of page no. 19
SERVICE AND ADJUSTMENTS FRONT-TO-BACK ADJUSTMENT (See Figs. 23 and 24) TO LEVEL MOWER HOUSING IMPORTANT: DECK MUST BE LEVEL SIDE-TO-SIDE. IF Adjust the mower while tractor is parked on level ground or THE FOLLOWING FRONT-TO-BACK ADJUSTMENT IS driveway. Make sure tires are properly inflated (See NECESSARY, BE SURE TO ADJUST BOTH FRONT LINKS “PRODUCT SPECIFICATIONS” on page 3 of this manual). EQUALLY SO MOWER WILL STAY LEVEL SIDE-TO- If tires are over or underinflated, you will not properly a
Summary of Page No. 20
SERVICE AND ADJUSTMENTS TO REPLACE MOWER BLADE DRIVE BELT WITH PARKING BRAKE “ENGAGED” (See Fig. 25) The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake. 1-1/2″
BELT REMOVAL – • Remove mower from tractor (See “TO REMOVE MOWER” in this section of this manual). NUT “A” • Work belt off both mandrel pulleys and idler pulleys. JAM NUT • Pull belt away from mower. BELT INSTALLATION – • Install new belt in reverse order of removal. •Make
Husqvarna TC130 garden tractor 9605101-23
- Description
- Characteristics
- Documentation
- Reviews (0)
- Accessories
Description
Husqvarna TC130 garden tractor is a machine used by owners of private houses to care for the garden and surrounding area. The reliable Briggs&Stratton engine guarantees long service life of the unit. Operating mode: collecting in a grass collector. It is possible to equip with a mulching device. With attachments (trailer, scarifier, moss rake, gravel harrow, tractor spreader, etc.), the machine becomes multifunctional. There is a system for the presence of the operator, a system for disabling knives when reversing. The cutting height is adjustable with a lever on the wing and varies from 38mm to 102mm.
|
The compact design of the machine makes it easy to maneuver in small areas; tractor takes up much less storage space |
|
Extended leg support for comfortable and easy entry and exit . |
|
Husqvarna TC 130 mini tractor’s speed and direction is easily controlled with foot-operated hydrostatic transmission. There are separate pedals for forward and reverse movement. This allows the operator to keep both hands on the steering wheel and maximize control of the steering process. |
|
The Husqvarna TC 130 tractor is equipped with a powerful single-cylinder Briggs & Stratton Husqvarna Series Intek 3125 engine with a maximum pressure forced lubrication system, an oil pump and an oil filter. Powerful and quiet. |
|
Battery indicator with charger gives a clear indication of the battery status, making it easy to see the charge level. The charger connector is located next to the indicator for more convenient battery charging. |
|
The mechanical clutch for engaging the cutting blade/blades is conveniently located on the control panel. |
|
Fender-mounted lever provides easy access to grass cutting height adjustment for improved ergonomics. Spring-loaded cutting deck makes adjustments easy. |
|
The Husqvarna TC 130 tractor has an adjustable sliding seat. The operator can adjust the longitudinal position of the seat without getting up from it. |
|
The tractor’s comfortable steering wheel is angled for a more comfortable working position. |
|
The cutting unit, ventilated with Air Induction, produces an exceptionally powerful jet of air for a perfect cut. |
|
The swivel front axle provides good stability and ride comfort, providing excellent flotation even on rough terrain |
|
Husqvarna TC 130 garden tractor equipped with headlights for comfortable working in the dark and cup holder |
- The efficient Husqvarna TC 130 garden tractor is compact, ergonomic and easy to use.
- Premium powder coated cutting deck resists corrosion and is durable.
- Large (200L) efficient grass collector ideal for collecting grass and leaves. No need to leave the operator’s seat to empty it. Equipped with audible full indicator.
- For safety reasons the Reverse Control System (ROS) turns off the cutting blades when reversing, there is also an automatic switch under the seat, if the operator leaves the seat, the cutting deck will automatically turn off.
- The BioClip® plug (accessory) allows the Husqvarna TC 130 lawn tractor to be used in grass cutting mode and then used as fertilizer.
The Husqvarna TC130 garden tractor is a machine used by owners of private houses to care for the garden and surrounding area. The reliable Briggs&Stratton engine guarantees long service life of the unit. Operating mode: collecting in a grass collector. It is possible to equip with a mulching device. With attachments (trailer, scarifier, moss rake, gravel harrow, tractor spreader, etc.), the machine becomes multifunctional. There is a system for the presence of the operator, a system for disabling knives when reversing. The cutting height is adjustable with a lever on the wing and varies from 38mm to 102mm.
The compact design of the machine makes it easy to maneuver in small areas; the tractor takes up much less storage space
Increased leg support ensures comfort and ease of entry and exit.
Easy speed control and
Features
Features | |
Weight kg | 176 |
Alternator, A | 12 |
Battery capacity, Ah | 28 |
Sound pressure at operator’s ear, dB(A) | 85 |
Number of cylinders | 1 |
Engine model | Intek 3125 |
Engine power, kW | 6. 3 |
Engine power, h.p. | 8.5 |
Battery voltage, V | 12 |
Fuel tank capacity, l | 5.7 |
Engine cooling | Air |
Engine manufacturer | Husqvarna |
Displacement cm³ | 344 |
Hour meter | No |
Engine type | Petrol |
Transmission type | Hydrostatic |
Filters | |
Cutting height, mm | 38-102 |
Engine power, h.p. | 8.5 |
Cutting width cm | 77 |
Dimensions and weights | |
Gross weight, kg | 178 |
Shipping height mm | 2500 |
Shipping length mm | 1120 |
Wheelbase cm/in | 119 / 47 |
Tire size cm/in | 13×5-6 |
Packed width mm | 1120 |
Cutting equipment | |
Cutting height, min-max, mm | 38-102 |
Cutting deck material | Steel |
Blade clutch | Mechanical |
Cutting modes | To grass bag |
Cutting width cm | 77 |
Equipment | |
Number of knives | 1 |
Headlight | Yes |
Drive system | |
Number of gears forward | Continuously variable |
Number of gears, reverse | Continuously variable |
Drive | Rear |
Forward speed, min-max, km/h | 0-6. <- Предыдущий пост: Good laser color printer: The 4 Best Laser Printers of 2023 Следующий пост: Lighting equipment in photography: 18 Types of Photography Lighting Equipment You Need to Know -> |